Turbidity Curtain and Boom Accessories
Marine Accessories for Turbidity Curtains, Oil Booms and Debris Booms
Marine accessories are a great way to ease the installation and deployment of any floating boom, barrier, or curtain. Made from robust components and parts, these turbidity curtain and boom accessories help with stabilization, adjusting water depths, and boom deployment methods.
Depending on your project and specific requirements, different boom and turbidity curtain accessories are essential to help install, tow, and protect the barrier. See below for more information and specifications on standard silt barrier and boom accessories such as:
We offer pre assembled turbidity curtain anchor kits, which are required for any floating barrier being used in moving water conditions including: Type 2 and Type 3 Turbidity Curtains, Open Water Oil Booms, River Debris Booms, and more. Having the right anchor pattern, installation design, and anchors can significantly reduce and redistribute loads placed on your barrier, which will increase the longevity of your floating boom or barrier. Proper anchoring, is crucial to the success of your floating barrier. Learn more about the importance of anchoring and proper installation here Ground Anchor Installation (PDF) and Silt Curtain Anchoring Instructions (PDF).
Anchoring is often dependant on site conditions and requirements, including currents, tides, waves, and anticipated load. For recommendations regarding your specific site area, please feel free to contact our team at 1-772-646-0597 to discuss your requirements.
Tow Bridles are a small device connected to both the boom/barrier and the tow boat. Tow bridles help prevent damage to your boom during insallation by redistributing the load so that the boat pulls at various portions of the curtain rather than pulling from a single position. Tow bridles are a great booms accessory to use any time you are towing/deploying a floating barrier.
|Medium||18 in. (For 24 in. Boom or Less)|
|Large||24 in. (For 25 in. Boom or More)|
|HD||24 in. Heavy Duty|
|HD||36 in. Heavy Duty|
Inflatable Marker Buoys are expected to withstand even the toughest marine conditions and outside elements. These floating buoys are built for rigorous commercial marine use, and are also perfect for pleasure craft owners. This all-purpose floating marine buoy can be used in conjunction with a variety of anchoring systems as part of your turbidity curtain and boom application, or as a fender buoy, demarcation guide and mooring signal.
Marker Lights are a great way to increase visibility of a boom in any given location. Lights include a buoy, light, and pole that allows the light to float in the water next to the boom. They are genearlly required to ensure safe navigation and compliance with demarcation regulations.
Tidal Compensators allow barriers and booms to adjust to changing tides or water heights. It is connected directly to both a vertical structure and the boom or barrier. As water levels change, the tidal compensator will move up and down bringing the barrier with it.
Reefing lines are primarily designed for turbidity curtains and allow customers to adjust the depth of the barrier depending on tides and contours. Adjusting lines are ideal for areas with varying water depths. Turbidity curtain reefing lines are built into your curtain at the time of manufacture, but only upon request. If you are interested in using reefing lines for your project, please ask your project specialist for information and pricing.
|Reefing Lines||15 ft.|
|Reefing Lines||16 ft. - 30 ft.|
|Reefing Lines||31 ft. or More|
To patch a small rip in your curtain, see our Vinyl Repair Kit.
For more information on our floating barriers, please check out the following links:
- Turbidity Curtains - Frequently Asked Questions
- Turbidity Curtain Selection Guide
- Turbidity Curtains
- Debris Boom
- Water Baffles
- Oil Boom
- Boom Accessories (pdf)
- Turbidity Curtain Anchoring Article (pdf)
View All Boom and Barriers.