Storm Drain Covers and Guards

Storm Drain Inlet Protection Products for Filtration

storm drain coversInlet storm drain covers are robust filtration products designed to accommodate the requirements of combination street drains. Made from a reliable filter fabric, the storm drain covers allow water to continue to pass through the drain while removing sediment and other larger particles. This protects stormwater systems from unwanted pollutants and helps prevent contamination.

Stormwater Drain Cover Features

  • Fabric: Reinforced Nonwoven Fabric
  • Design: Built-In Magnets
  • Flow Rates: Accommodates Rates up to 192 gal/sq.ft./min.
  • Overflow Ports Available

Stormwater Drain Cover Benefits

  • Equipped for Street and Combination Drains
  • Handles High Flow Rates
  • No Tool Installation
  • Helps Remove both Sediment and Hydrocarbons

Drain Guards are made from a filter fabric that is equipped to handle flows up to 192 gal/sq.ft./min and are able to remove sand, trash, and dirt.

If you have questions about storm drain inlet protection products, please don't hesitate to call us at 1-772-646-0597 or request a price quote.

Stormwater Inlet Guard
stormwater drain cover
Stormwater Inlet Guard Plus
storm drain covers

Stormwater Drain Cover Specifications

Dimensions
24" x 24" (610 mm x 610 mm)
24" x 36" (610 mm x 915 mm)
24" x 48" (610 mm x 1,220 mm)
24" x 24" (610 mm x 610 mm)
Curb-Style (for combination drains)
24" x 36" (610 mm x 915 mm)
Curb-Style (for combination drains)
24" x 48" (610 mm x 1,220 mm)
Curb-Style (for combination drains)

Inlet Drain Guard Installation

stormwater inlet coversOne of the greatest advantages these storm drain covers offer is their no-tool installation. Many drain guards are installed by removing the drain grate, placing the guard in or on other drain, and then replacing the grate. By contrast, the inlet drain guard installs in minutes through built in magnets located within the guard.

  • Quick Placement of Guards onto Grate
  • No Grate Lifting
  • Reduced Installation Times
  • Easy Removal After Use

How Does This Product Keep You in Compliance?

  • Helps Sites Comply with NPDES, 40 CFR 122.26 (1999), and TMDL Requirements
  • Used as a SWPPP Solution

In addition to the filtration drain covers, we also offer a Drain Seal that is designed to temporarily block all water, oil, and contaminants from entering the drain. These covers are made from a polyurethane to seal off drain during a spill.

Other Storm Drain Covers and Filters

Drain Guard
Drain Guard
Over Grate Drain Filter
Over Grate Drain Filter
Curb Inlet Filter
Curb Inlet Guard

Storm Drain Grate Cover
Storm Drain Grate Cover

Under Drain Filters
Under Grate HD Filter

Curb Gutter Log
curb gutter guard

If you have questions about storm drain inlet protection products, please don't hesitate to call us at 1-772-646-0597 or request a price quote.