Storm Drain Cover | Stormwater BMP
Storm Drain Seals to Keep Pollutants Out of Water Systems
Drain Seals are a high strength impermeable cover used to temporarily block off drains in the event of a leak or spill. Made with a reinforced blend of polyurethane materials, these covers stick to the edges of the drain to prevent water, oil, hydrocarbons, grease and other contaminants from entering the drain system. Common uses include:
- Street Drains
- Gas Stations
- Parking Lots
- Car Washes
Drain seal BMPs are designed for short term use on drains and are available in square, circular, and rectangular models. When you need complete drain protection, these covers are the way to go!
Storm Drain Cover Features
- Exterior Materials: Two Outside Layers of Polyurethane
- Interior Material: Reinforced Mesh
- Completely Reversible
- Non-Absorbing and Impermeable
- Models: Square, Circular, and Rectangular
- Accessories: Truck Mount
Storm Drain Cover Benefits
- Completely Seals off the Drain
- Both Sides are Able to Secure to the Drain
- Easy to Clean with Soap and Water
- Reinforced Polyurethane Layers
- Installs within Minutes
- Lightweight and Easy to Access
- Prevents Unwanted Materials from Entering the Drain
- Protects Systems Against Hydrocarbons and Water
Square Drain Seals
|18" x 18" x 3/8"
(458 mm x 458 mm x 10 mm)
|24" x 24" x 3/8"
(610 mm x 610 mm x 10 mm)
36" x 36" x 3/8"
|42" x 42" x 3/8"
(1,067 mm x 1,067 mm x 10 mm)
|48" x 48" x 3/8"
(1,220 mm x 1,220 mm x 10 mm)
|54" x 54" x 3/8"
(,1372 mm x 1,372 mm x 10 mm)
Circular Drain Seals
|12" dia. x 3/8"
(305 mm dia. x 10 mm)
|20" dia. x 3/8"
(508 mm dia. x 10 mm)
|30" dia. x 3/8"
(762 mm dia. x 10 mm)
|42" dia. x 3/8"
(1,067 mm dia. x 10 mm)
Rectangular Drain Seals
|18" x 58" x 3/8"
(458 mm x 1,474 mm x 10 mm)
|36" x 58" x 3/8"
(915 mm x 1,474 mm x 10 mm)
How Does This Product Keep You in Compliance?
- Prevents Unwanted Liquids from Entering the Drain
- Can be Implemented as a SWPPP Solution
- Storm Drain Cover is a Stormwater BMP
The Taurus Over Grate Filter is a stormwater BMP that filters debris and sediment from storm drains. These drain covers block debris and trash from entering storm drains, while still allowing water to flow through. These over grate filters present significant cost savings, as with regular maintenance they can be used in the field for long periods of time.
Due to the impermeable nature of these storm drain covers, these units are often stored as part of an emergency spill response kit. During a spill, guards can be quickly taken out and installed to prevent any unwanted materials from entering the drain. For more information on these and other oil spill cleanup products, check out our Spill Kits.
|Drain Berms||Storm Drain Cover||Truck Mount for Drain Covers||Storm Drain Marker||Spill Kits||Mini Spill Basins|
Looking for something long term? In addition to the drain seal, we also offer several Drain Filter Guards that work to remove silt, sediment and other materials from the water. These drain guards can be placed directly on top of the grate or inside the drain to control and filter materials. The standard lifespan of a catch basin insert is 6 months or the amount of time required to collect the maximum amount of materials.