Oil Catch Basin Guard | Stormwater Solutions

Oil Catch Basin Drain Guard

Stormwater Drain Guards Oil & Sediment

Question: I am looking for oil catch basin stormwater drain guards that I can use to remove both oil and sediment before it enters my drain. Is there anything like this available?

Storm Water Drain Guard Inserts

oil catch basin filter For the type of stormwater control you are looking for, a great choice would be one of our Stormwater Drain Guard Inserts. This storm drain guard inserts directly into catch basins and is designed specifically for filtering of both sediment and oil. Advantages to the design include the following:

  • Large Area for Securing the Guard
  • Strong Material to Handle Increased Sediment and Hydrocarbons
  • Effectively Contains Filtered Items
  • Allows Water to Pass through the Material

Due to the ease of use and fast installation, drain guards are a popular choice for any site or street drain adjacent to a job site, construction site or work area. Guards are available in various sizes and models to accommodate different drains and filtration requirements.

gei webstore

If you have questions about any of our products, give us a call at +1-772-646-0597.

 

Oil & Sediment Drain Guard

oil and sediment drain guardThe standard oil and sediment drain guard is designed for dirt, sand, and hydrocarbons. These oil catch basin drain guards feature a witches hat design, and inserts directly into the catch basin to filter out stormwater as it flows into the system.

Model 9217 9356
Dimensions
48" L x 36" W x 18" H
60" L x 60" W x 18" H
Performance Max.
0.87 gal of oil, 40 lbs. of sediment
1.55 gal of oil, 40 lbs. of sediment
Water Flow in New Condition
in excess of 500 gpm
in excess of 900 gpm
Bypass Rate
approx. 700 gpm
approx. 700 gpm

 

Oil & Sediment Plus Model

oil and sediment drain guardThe oil and sediment plus model has the same basic design as the first drain guard, but with the addition of X-tex filter strips. These strips hang down inside the catch basin to increase the oil and grease absorption rate.

 

Model 9219 9358
Dimensions
48" L x 36" W x 18" H
60" L x 60" W x 18" H
Performance Max.
1.38 gal of oil, 40 lbs. of sediment
2.06 gal of oil, 40 lbs. of sediment
Water Flow in New Condition
in excess of 500 gpm
in excess of 900 gpm
Bypass Rate
approx. 700 gpm
approx. 700 gpm

 

Oil & Debris Blocker

storm drain filterIn addition to these filtering oil catch basin drain guards, you could also consider filtering products such as the Oil & Debris Blocker. This storm drain filter is made from polyethylene, and fits directly into your catch basin to block trash and oil from entering the system. This filter can be installed directly to a drain outflow and will filter out products without blocking up water.

To view this oil catch basin filter and other stormwater products, check out our Stormwater BMP Page.