Non Woven Geotextiles GC130 | The Paving Perfector

Non Woven Geotextiles

3.8 oz. Nonwoven Geotextiles for Paving Fabric and Asphalt Overlay

geotextile liner, geotextile filter fabricThese 3.8 oz nonwoven geotextiles are designed for light weight filtration, separation and stabilization applications. This fabric strength is perfect for areas needing a solution for asphalt repair or reinforcement in areas that have deteriorated over time. When placed between two mediums, this non woven geotextile has helped to keep aggregates separate and has worked to strengthen and reinforce areas.

Looking for something with slightly more strength? Check out our Nonwoven Geotextile overview page. Here you will find a large selection of nonwoven filter fabrics in sizes anywhere from 3 oz. to 16 oz.

Request a Quote

If you have questions about any of our products, give us a call at +1-772-646-0597 or request a price quote.


Non Woven Geotextiles Technical Specifications:

Property
Test Method
Minimum Average Roll Value (M.A.R.V.)
Weight (typical)
ASTM D5261
3.8 oz/yd²
(129 g/m²)
Grab Tensile
ASTM D4632
90 lbs
(.40 kN)
Grab Elongation
ASTM D4632
50 %
Trapezoid Tear Strength
ASTM D4533
35 lbs
(.155 kN)
CBR Puncture Resistance
ASTM D6241
55 bs
(.244 kN)
UV Resistance
ASTM D4355
70%/500 hrs
Asphalt Retention
ASTM D4355
0.2 %/hrs
Melting Point
ASTM D4355
300 %/149 hrs

Packaging Details:

Packaging
Details
Roll Dimensions (W x L) - ft
6.25/10.5/12.5/15 x 360
Square Yards per Roll
250/420/500/600
Estimated Roll Weight - lbs
70/115/130/150

*Our nonwoven geotextile materials meet or exceed these specifications.

What Makes This Non Woven Geotextile Unique?

The non woven geotextile fabric offers a 100% needle punched design that allows for water to filter out, helping to prevent erosion in various locations. These materials work to keep the upper portion of the soil secured, while preventing further erosion along the under areas. These geotextile have worked to help with some of the following applications:

  • Asphalt Overlay (between the old and new asphalt)
  • Small Road Repair
  • Underlayment
  • Stabilization
  • Separation Applications
  • Reinforcement and Cushioning


When used in these types of applications, the nonwoven geotextile can work to provide superior strength, reinforcement and filtration applications. As a lighter nonwoven fabric option, these geotextiles have often been used for applications involving subsurface draining and filtering. Using this geotextile can add smoothness and reduce needed maintenance on a road over time.

non woven geotextiles, non-woven fabricThis non woven geotextiles fabric is made from 100% needle punched polypropylene and is both UV and rot resistant. It retains asphalt at 0.2 gal/yd2 and has a high melting point at 300 degrees F and 149° C.

Keep your roads from looking like the picture on the right by building and repairing with nonwoven geotextiles.

geotextile, quote request Interested in this non woven geotextiles but want to know more about it? Give us a Call at +1-772-646-0597 .


Not Sure Which Non woven Geotextiles You Need?

Drainage and Filtration:

Environmental Applications:

Separation and Underlayment:

Asphalt Overlay: