Thermal Oxidizer Incinerator
Model A 2.0
Granite Environmental incinerators for sale include the thermal oxidizer system model A 2.0.
This thermal oxidizer system is modular and multiple chambered with controlled air.
Perfect for incineration of mixed solid waste disposal.
Please contact our Granite Environmental tech team in regard to our incinerators for sale with any questions you may have (+1) 772-646-0597 or toll free (888) 703-9889.
To provide you with the best incinerator to meet your needs,
please take a moment and complete our
Solid Waste Application Data Survey.
Benefits:
- Advanced cyclonic secondary combustion chamber,
- Thermal oxidation of combustion gases with over 1 second retention std.,
- Utilizing weight saving refractory materials,
- Modular construction enhances ease of erection and installation,
- Ongoing system maintenance (critical for remote locations).
Product Specifications:
System Capacity:
Batch Operation: Approx. 3 yd3 (2.29 m3) per batch cycle
Intermittent Feed (w/optional loader): 1.26-2 yd3/hr (1.6-1.8 m3//hr) up to 8 hrs/day
Request a price quote
Technical Specifications:
Product Flyer: Solid Waste Incinerator Model A 2.0 Flyer
Electrical required: Single point - 230/460V, 3ø, 60 Hz, 25/15 amp (40/25 amp w/optional loader)Dimensions:
- Length overall: 11’-6” (2896mm) batch system w/o loader20’-6”(5639mm) w/optional loader system
- Width overall - 9’-3” (2820mm)
- Height (w/o stack) - 10’-0” (3048mm)
- Approx. weight - 16,500 lbs. (7500 kg)
- Type: fixed hearth, with controlled under-fir air injection
- Chamber volume: 100 cu. ft.
- Hearth Area: 20 sq. ft.
- Burner capacity: .6 MMBtu/hr. (Hi-Lo-Off control)
- Construction:
- skid - 6”, 10.5#/ft., A36 channel
- shell - .250” thick, A36 plate
- lining - 4”, 2800°F 750 psi, (Plicast 3100KK or equal)
- insulation - 1”1900°F Fiber (ASTM C612093, type V)
- Approx. weight - 9,000 lbs. (4090 kg)
Secondary chamber:
- Type: cyclonic thermal oxidizer with 1+ sec. r/t @ 1600°F (850°C)
- Chamber volume: 59.5 cu. ft. (std.)
- Burner capacity: 1.43 MMBtu/hr. (full modulating, excess air control)
- Construction:
- shell - .250” thick, A36 plate
- lining - 3”, 2800°F 750 psi, (Plicast 3100KK or equal)
- insulation - 1”1900°F Fiber (ASTM C612093, type V)
- Approx. weight - 6000 lbs. (2727 kg)
Call our tech team to discuss any product questions or requirements you may have for these incinerators for sale. You can reach us at (+1) 772-646-0597 or toll free at (888) 703-9889 or fill out our quote request form for our incinerators for sale.
Combustion air:
- Supply to under-fire and secondary air injection
-
3 hp, 230/460 V, 3Ø, 60Hz
-
850 cfm @ 18” W.C. pressure
Systems Control: Siemens S-7 series PLC with Touch-screen operator interface to include:
- Primary & secondary chamber temperature control
- Temperature actuated fuel and air control
- Burner interface, status and reset access**
- System status and alarm display
- Hydraulic systems control (applicable with optional loader)
-
** Discrete, UL, CSA, FM & IRI burner monitoring/control/U.V. or CAD flame supervision provided for each burner
Exhaust Stack:
- Std. refractory lined (2-4’ sections with s.s. no-loss cap & spark screen)
- Construction:
- shell - 10 gage, A36 carbon steel
- lining - 3” 2400°F, 175 psi, (Plicast AL-Tuff LWI-24 or equal)
- wt. - 155 lb/ft (70.45 kg/ft.)
Optional loader:
- Type: Hydraulic ram feed (optional cart tip hopper load available)
- Hopper volume: 14 cu. ft. (.4 m3)
- Power unit: 5hp, 230/460 V, 3Ø, 1800 psi
- Hydraulic cylinders: 2500 psi: Charge door - two 2” bore, 30” stroke
- Charging ram- two 2” bore, 36” stroke
- Hopper lid - one 2.5” bore, 16” stroke
- Hopper loader - two 2.5” bore, 18” stroke
- Charging frequency: 10-15 minutes, up to 4-5 times per hour
- Approx. weight: 5,000 lbs. (2273 kg)
