Geotextile Stabilization Fabric | Non Woven Geotextile Applications

Geotextile Stabilization Fabric - 7 oz

Non Woven Geotextiles for Stabilization, Filtration & Separation

geotextile stabilization fabric

This 7 oz nonwoven geotextile material is a stabilization fabric commonly used in erosion control applications involving filtration, drainage, or other erosion control applications. Built with high permeability levels, these geotextiles are often used to help stabilize an area and prevent erosion due to water pooling or build-up.

Looking for something with increased strength? We have several additional Nonwoven Geotextiles ranging from 3 oz to 16 oz in size, as well as high-strength Woven Geotextiles that can help with stabilization applications.

Request a Quote

If you have questions about any of our products, give us a call at +1-772-646-0597 or request a price quote.


7 oz NonWoven Geotextile Technical Specifications:

Property
Test Method
Minimum Average Roll Value (M.A.R.V.)
Weight (typical)
ASTM D5261
7 oz/yd² (237 g/m²)
Grab Tensile
ASTM D4632
200 lbs (.889 kN)
Grab Elongation
ASTM D4632
50 %
Trapezoid Tear Strength
ASTM D4533
50 lbs (kN)
Thickness*
ASTM D5199
75 mils (0.33 mm)
CBR Puncture Resistance
ASTM D6241
90 lbs (2.29 kN)
Permittivity*
ASTM D4491
540 sec -1
Permeability
ASTM D4491
0.3 cm/sec
Water Flow*
ASTM D4491
110 gpm/ft²
(4470 l/min/m²)
A.O.S*
ASTM D4751
70 U.S. Sieve
(.212 mm)
UV Resistance
ASTM D4355
70 %/500 hrs

Packaging Details:

Packaging
Details
Roll Dimensions (W x L) - ft
15 x 780
Square Yards per Roll
1300
Estimated Roll Weight - lbs
620

*Our non woven geotextile stabilization fabrics meet or exceed these specifications.

Request a Quote

If you have questions about any of our products, give us a call at +1-772-646-0597 or request a price quote.

Questions? We can help! Call our team at +1-772-646-0597 or submit a form


Non Woven Geotextile Applications

The nonwoven geotextile has been used in several different permittivity and filtration applications that allow the fabric to help stabilize an area and prevent erosion. Some of the most common functions where the non woven fabric has been used includes the following:

  • Filtration Applications
  • Drainage Application
  • Ground Stabilization and Reinforcement
  • Cushioning
  • Asphalt or Ground Overlay/Protection Applications
  • Waterproofing

Depending on your application, use of this geotextile can help to stabilize your area and prevent further erosion or vegetation requirements. The non woven fabric has often been used under soil to stabilize areas prior to vegetation or road laying. This helps to keep the top level of your soil or road firm regardless of water. Some common uses for this geotextile have included the following:

  • Slope Reinforcement
  • Road Stabilization
  • Asphalt Overlay
  • Ground Underlayment
  • Filtration Applications
  • Erosion Control Applications
  • Landfill Stabilization

Once soil is successfully stabilized, it can begin to grow vegetation, create buildings, or allow traffic to start operating on the road. If you are looking for something with additional strength and less filtration ability, you may also consider one of our Woven Geotextile Stabilization Fabric. These area used in several different areas for high strength stabilization and separation applications.

Questions? We can help! Call our team at +1-772-646-0597 or submit a form.

Request a Quote

If you have questions about any of our products, give us a call at +1-772-646-0597 or request a price quote.



Not Sure Which Geotextile Stabilization Fabric You Need?

View our products below, sorted by function, or Search our Products!

Drainage and Filtration:

Environmental Applications:

 

Separation and Underlayment:

Asphalt Overlay:

 

View all Non Woven Geotextiles

 

Questions about geotextile stabilization fabric? Our GEI Works sales team would be happy to support you.

Call +1-772-646-0597 to discuss your geotextile stabilization fabric requirements.